Crypto, the big picture
How is liquidation price calculated? A 2026 futures leverage and position size calculator (Binance, OKX, Bybit, Bitget)
Liquidation price comes from your margin, your position size and the exchange's maintenance margin rate. This calculator puts one BTC or ETH perpetual position on four exchanges side by side, sizes a position from the loss you accept, and shows what is left after fees and funding.
Kelvin Wang · · 5 min read
Key points
- The same 0.1 BTC at 10× liquidates within about 0.1 percentage points on all four exchanges; leverage is what sets the distance.
- A bigger position moves into a higher maintenance margin tier and liquidation moves closer to entry; each exchange tiers differently.
- The stop and the size decide how much you lose, not the leverage: size from risk first, then pick a leverage that liquidates after the stop.
Every exchange app has a futures calculator, but it only covers that exchange. This one puts Binance, OKX, Bybit and Bitget on one chart, each with its own published formula and maintenance margin tiers. The tiers were read from each exchange’s own pages and public APIs on 16 November 2026; the fees are the regular-user rates approved for this site’s exchange comparison. The full version is the liquidation price calculator; its address keeps what you typed, so you can share it.
How is the liquidation price worked out?
The money you put in when you open is the margin; for isolated margin it is the position value divided by the leverage. When the price moves against you the loss comes out of the margin, and when only the maintenance margin is left the exchange closes the position. Maintenance margin = position value × maintenance margin rate, and that rate is tiered: the bigger the position, the higher the rate.
The four exchanges agree on the idea and differ in the details:
- Binance: maintenance margin has no fee in it; big positions use “value × rate − maintenance amount” per tier, with a full worked example in the official FAQ.
- OKX: tiers count contracts (one BTC contract is 0.01 BTC), the whole position takes its tier’s rate, and the taker fee rate is added to the maintenance margin.
- Bybit: both initial and maintenance margin include an estimated fee to close; they cancel out, so only added margin is affected by the fee.
- Bitget: the taker fee rate is added to the maintenance margin; the amount subtracted above the first tier is not published, so the calculator only covers positions up to 200,000 USDT.
Liquidation triggers on the mark price, not the last trade. The calculator picks the tier from the value at entry, so it can differ slightly from the exchange’s screen.
Futures liquidation price calculator
Liquidation price (four exchanges)
90,298.0 – 90,415.9
−9.58% to −9.70% from entry
- Position value
- 10,000.00
- Margin
- 1,000.00position value ÷ leverage
- Leverage
- 10.00×
What you keep after closing
Tier, maintenance margin and fees per exchange
| Exchange | Tier | Maint. rate | Maint. margin | Tier max | Maker / Taker | Fees as of |
|---|---|---|---|---|---|---|
| Binance | 1 | 0.4% | 40.00 | 150× | 0.02%/0.05% | 2026-10-25 |
| OKX | 1 | 0.4% | 45.00 | 100× | 0.02%/0.05% | 2026-10-25 |
| Bybit | 1 | 0.33% | 37.95 | 150× | 0.02%/0.055% | 2026-10-25 |
| Bitget | 1 | 0.4% | 46.00 | 150× | 0.02%/0.06% | 2026-10-25 |
Maintenance margin tables read on 2026-11-16 from each exchange's own pages and public APIs; fees are the regular (VIP0) rates approved for this site's exchange comparison. Liquidation triggers on the mark price; the tier here comes from the value at entry and funding is estimated on the entry value. The exchange's own screen is final.
Scenario 1: where does 0.1 BTC at 10× liquidate?
Say you go long 0.1 BTC at 100,000 USDT: a 10,000 USDT position, isolated at 10×, so 1,000 USDT of margin. The four liquidation prices land between 90,298 and 90,416, about 9.6% to 9.7% below entry. Bybit is furthest because its first-tier maintenance rate is 0.33%; the other three use 0.4%.
The same position, changing only the leverage:
At every leverage the four exchanges are within 0.15 percentage points of each other.
Source: binance.com
Doubling the leverage roughly halves the distance. At 100× a 0.6% dip liquidates you: one ordinary candle.
Switch to cross margin with a 3,000 USDT wallet and the whole wallet backs the position: liquidation moves out to about 70,300, roughly 29.7% below entry. The cost is that a liquidation now takes the whole wallet, not just 1,000 USDT.
Scenario 2: why does a bigger position liquidate closer?
Same long at 100,000 USDT and 20×, but 12 BTC instead of 0.1: a 1.2 million USDT position. Binance moves to its third tier (0.65%), Bybit to its second (0.5%), and OKX, counting contracts, to its second (0.5%). Bitget’s first tier ends at 200,000 USDT and the deduction above it is not published, so the calculator leaves it out.
- 0.1 BTC
- 12 BTC
Tiers read 2026-11-16; OKX and Bybit taker fees 0.05% and 0.055%.
Source: binance.com, okx.com, bybit.com
The gap is small because this is not yet a big position. Higher tiers climb to rates of several percent, and that is where the same leverage liquidates at visibly different prices on different exchanges. Some leverages cannot be opened at all at that size; the calculator flags leverage above the tier’s limit.
Scenario 3: risking 1%, how much should you open?
A 10,000 USDT account wants to short ETH at 3,500 USDT with a stop at 3,600, losing at most 1% of the account (100 USDT) if stopped out. Switch to “Size from risk” and enter those four numbers:
- Size to open (Binance, OKX)
- 0.966 ETH
- Position value
- 3,380 USDT
- Highest leverage that liquidates after the stop
- 30×
- Net after closing at 3,300, held 3 days (Binance, OKX)
- +192.90 USDT
The size is the loss you accept ÷ (distance from entry to stop + two taker fees). Higher fees mean a smaller size: 0.962 ETH on Bybit, 0.959 ETH on Bitget.
The position is only 0.34× the account, so this trade needs no leverage at all. Leverage decides how much margin you post and where liquidation sits; as long as liquidation is beyond the stop, 3× or 30× both lose 100 USDT at the stop. From 31× (32× on Bybit) liquidation comes before the stop.
For the close, enter an exit of 3,300, funding of 0.01% per 8 hours and 9 periods (3 days). The price move earns about 193 USDT and the two fees cost about 3.3 USDT; with positive funding longs pay shorts, so this short receives about 3 USDT. All four exchanges end between 190.9 and 192.9 USDT.
What does the calculator leave out?
- Other positions: cross margin counts this position only. Other positions’ PnL and maintenance margin move the real liquidation price.
- Tier at entry: the position value changes as the price moves, so a position right at a tier boundary may fall in the next tier on the exchange.
- Partial liquidation: OKX and others reduce large positions in steps before closing them fully.
- VIP rates and fee-token discounts: the fees are regular-user rates; VIP traders and those paying fees in an exchange token pay less.
- Bitget above tier 1: the deduction is not published, so it is not computed.
FAQ
Does higher leverage mean higher fees?
Fees are charged on the position value, not the leverage. A 10,000 USDT position pays the same fee at 1× and 50×; high-leverage traders usually just open bigger positions.
Is cross margin safer than isolated?
Cross liquidates further away because the whole wallet backs the position, but a liquidation then takes the whole wallet. Isolated loses at most that position’s margin. Which is better depends on whether you use a stop and how much else sits in the wallet.
Why does the exchange app show a slightly different liquidation price?
The app uses the live mark price, your account’s actual tier and fee rate, and in cross mode your other positions. The numbers here use the same formulas for comparing exchanges and planning; the exchange’s screen is final before you order.
Sources
- 1. How to Calculate Liquidation Price of USDⓈ-M Futures Contracts
- 2. USDⓈ-M Futures Leverage & Margin
- 3. How do I calculate the liquidation price for futures?
- 4. Tiered maintenance margin ratio rules
- 5. Position tiers API (BTC-USDT, ETH-USDT perpetual)
- 6. Liquidation Price Calculation under Isolated Mode (Unified Trading Account)
- 7. Risk limit API (BTCUSDT, ETHUSDT)
- 8. What Is Estimated Liquidation Price in Bitget Futures?
- 9. Position tier API (BTCUSDT, ETHUSDT)
Kelvin Wang
Electrical engineer building tools with AI agents, sharing hands-on notes on engineering and investing.
More about me